Setup
Mona - Raiden - Diluc
Deck code
AKCwziAMAeAQz7QMC/BA8bUPCxBQ8r0PCyDQ88MPDDAw9MgPDECA9skPDGCQ/coPDNAA
Info
Action cards in this deck are not crucial. There is one exception - Katheryne. This card is essential so you can finish turns before Narwhal. It is recommended that you restart until you start with that card on hand. It is not guaranteed that you will beat this challenge first try but this method for me is the most efficient. I did it first try but it all depends on Narwhal's moves. This tactic is focused on preparing One-Shot Diluc Burst buffed by Mona and Raiden Bursts.
Steps
Start with Raiden and Katheryne Action Card in hand. Use other action cards for dice tuning.
--- Turn 1 ---
Needed dices - 4x Electro
- Use Katheryne Action Card
- Use Raiden Skill
- Use Raiden Normal Attack
--- Turn 2 ---
Needed dices - 4x Electro 1/3x Pyro (I strongly recommend 3).
- Use Raiden Burst
- Switch to Diluc
- Use Diluc Normal Attack or Skill (Skill is an better option - more dmg, less loss chance)
--- Turn 3 ---
Needed dices - 4/6x Hydro (I strongly recommend 6).
- Switch to Mona
- Use Mona Normal Attack or Skill (Skill is an better option - more dmg over time, less loss chance)
- Use Mona Burst
Note: If Mona dies before step 2 or 3 you can try to take Diluc and use his Burst. Then you can try to finish Narwhal with Diluc and Raiden.
--- Turn 4 ---
Needed dices - 4x Pyro
- Use Diluc Burst
- If Narwhal is still alive try to finish it with Diluc and if he dies use Raiden or Mona
Note: If Diluc dies before using Burst you will most likely lose.
~ That's All ~

